To be continued with the previous three FIBCs articles, today we will discuss how to handle and transport of FIBCs/Jumo bags/big bags.
Part 1: Handling and Transport of FIBCs
Before talking about this issue, we need to know how is an FIBCs handled?
FIBC's are commonly mechanically handled by one of the following means:
• Lift Loops: Loops are located at the corners of the FIBCs.
• Stevedore Straps: A belt or rope connecting either two adjacent lift loops, or all
four loops, used for single point lifting.
• Single Point Lift: Created by extending the lift loop material or body fabric
so it can be gathered at one point above the bag.
• Sleeve Lift: The tubular sleeves running along two opposite edges of the FIBC.
1.1How do we safely lift FIBCs?
Before lifting, please check your FIBCs for transport damage. FIBCs should be lifted according to the instructions given on the label. As a rule, the FIBC should be lifted and lowered symmetrically avoiding any abrupt or jerky movements. Any form of swinging should be avoided during the lifting process.
1.2What do we need to consider when handling FIBCs by forklift?
FIBC should be transported close to the pole at the lowest level possible and with the pole bent slightly backwards. The FIBC should be positioned on the forklift so that the wheels of the forklift do not damage the FIBCs and the driver's view is not obstructed.
1.3How do we safely transport FIBCs by truck or in a freight container?
FIBCs must not be stowed next to cargo with sharp edges or rough surfaces which might harm the FIBCs.
If you have such these issues you can refer to these methods to solve the problems, we hope the above content is helpful to you. As a professional supplier of FIBCs sewing machines, you can contact our PACKSTAR.
